ComputingCleanroom and Equipment StatusCoral - XReporter
Button: Equipment ListButton: MSDS DatabaseButton: Policies & FormsButton: Education & TrainingButton: StaffButton: Events & Seminars Button: Publication Button: About CNF Button: Lab Manual

PHOTOLITHOGRAPHY
     Schedule Training   ¦



YES Image Reversal Oven

CAC Name: YES NH3

Photoresist image reversal oven

YES-58SM Image Reversal Oven Backup: Edward Camacho , Michael Skvarla
Equipment Training
Training is given one-on-one as needed. Please contact the tool manager to schedule training.

Description:

The YES 58-SM oven uses NH3 (ammonia) gas to reverse the tone of positive photoresist. This can be used to create an undercut profile in the photoresist for lift-off processing. In the reversal process, the chamber is purged of oxygen using vacuum and heat. It is then filled with 600 Torr of NH3 (ammonia) vapor. The NH3 reacts with the acid in the exposed resist rendering it insoluble in developer. The proceeding flood exposure causes acid to form in the previously unexposed areas allowing them to be removed in development, leaving behind the negative image of the first exposure. A descum process using O2 plasma is recommended after lift-off to promote good adhesion of deposited material

Capabilities:

  • NH3 environment
  • Undercut profiles for liftoff


Additional Resources:

Equipment Information Sheet
Image Reversal Basics
YES Image Reversal Oven Instructions


Back to Top

Photolithography Training Sessions for the Week of September 18th
Sep 18, 2017
General Photolithography training will be offered Tuesday at 1:30PM. We will meet in the Spinner room.

Heidelberg DWL2000 Mask Writer Training will be offered Wednesday at 3:30PM. Meet at the tool.

AB-M contact aligner, Schott IR inspection tool, MA6 contact aligner, and Wafer Bonder training can be scheduled with Edward Camacho.

________


For any other training sessions, this week contact the tool owner for scheduling. Please review the materials available at each of the web page ...more
ASML DUV Stepper *UNAVAILABLE* Thursday September 21st 9:00 am - Noon
Sep 14, 2017
The ASML DUV Stepper will be UNAVAILABLE Thursday, September 21st, as ASML will be performing diagnostics on the tool.

Garry

EQUIPMENT LIST


Button: Search Button: Search Keywords
Cornell University
NYSTARNNCINSF