ComputingCleanroom and Equipment StatusCoral - XReporter
Button: Equipment ListButton: MSDS DatabaseButton: Policies & FormsButton: Education & TrainingButton: StaffButton: Events & Seminars Button: Publication Button: About CNF Button: Lab Manual

     Schedule Training   ¦

Gamma Automatic Coat-Develop Tool

CAC Name: Gamma

Suss MicroTec Gamma Cluster Tool

Backup: John Treichler , Daniel McCollister
Equipment Training
Training is to be scheduled with the tool owner. Please schedule training within 2-3 days of your first anticipated use.


The Gamma automated photoresist and wet processing system is designed to meet needs for clean, reliable and high throughput photolithography processing. The configuration is tailored to perform a variety of DUV photoresist and antireflection coatings, wafer baking, developing and spray coating for conformal resist wet processing tasks. The SUSS MicroTec Gamma system is equipped with a sender/receiver cassette for 100mm through 200mm wafers. Different wafer sizes can be processed simultaneously without any mechanical changeover.


- DUV resist and ARC coating
- Wafer baking
- Wafer developing
- Conformal coating on pieces to 200mm wafers

Processes Available:

- UV-210 resist coating and baking
- AR3 coating and baking
- One configurable resist line for custom user needs
- Conformal resist coating with Alta Spray module
- Post exposure baking and 726-MIF developing


The coating module is primarily dedicated to DUV resist and ARC processing. An additional line exists in the coating module that can be utilized for additional ARCs, such as DSK-101-312,4. However, various i-line and g-line resists can be implemented by user request. This line will only be changed if ten or more wafers require coating.

Additional Resources:

Equipment Information Sheet


Back to Top

Photolithography Training Sessions for the Week of September 18th
Sep 18, 2017
General Photolithography training will be offered Tuesday at 1:30PM. We will meet in the Spinner room.

Heidelberg DWL2000 Mask Writer Training will be offered Wednesday at 3:30PM. Meet at the tool.

AB-M contact aligner, Schott IR inspection tool, MA6 contact aligner, and Wafer Bonder training can be scheduled with Edward Camacho.


For any other training sessions, this week contact the tool owner for scheduling. Please review the materials available at each of the web page ...more
ASML DUV Stepper *UNAVAILABLE* Thursday September 21st 9:00 am - Noon
Sep 14, 2017
The ASML DUV Stepper will be UNAVAILABLE Thursday, September 21st, as ASML will be performing diagnostics on the tool.



Button: Search Button: Search Keywords
Cornell University